Economic Dental Implant Motor Machine
Product Description
Economic Dental Implant Motor Machine
Operation
1) Turn on the power switch, and the screen will display as below: 1.1 If the foot pedal is fully pressed and held before turning on the power switch or when shown in Figure 1, waiting for a period of time will enter the factory reset and foot calibration mode. The first function is whether to restore the factory settings. If yes, the factory settings will be restored after calibration is completed. Otherwise, the user's saved data will be retained.
1.1.1)The second function is foot pedal calibration, which is completed according to the prompts (note: when step 1 fully steps on the foot pedal, please wait for at least 1 second before pressing to complete, and when step 2 completely releases the foot pedal, please wait for at least 1 second before pressing to complete, which can ensure the accuracy of this calibration.
1.1.2) After Step 2 is completed, the display screen will show the main interface, indicating that the calibration is complete.
1.2 )Do not step on the pedal, wait for the completion of display in logo interface, and main control interface will be displayed.
2) After booting up, enter the main control interface.