Article List

• How Does a Low Speed Handpiece Work?

  How Does a Low Speed Handpiece Work?An airline is attached to the back end of the handpiece, similar to a high speed handpiece.When air is introduced into the handpiece (via the chair unit foot pedal), air is forced over the vanes of the rotor (consisting of Vanes or blades), which causes it to spin

  News October 11, 2019
• How to choose dental handpiece

  HOW TO CHOOSE DENTAL HANDPIECEPublié par Michael Zhu VendrediIt is very important for hygienic, dentist, or lab technician to have dental handpiece for the practice. However, the surgical treatment needs the good and high quality of the tool. That is why the tools need to be cleaned and maintained b

  News October 11, 2019
• Handpiece chucking difference

  What are the Different Types of Chucking Mechanisms?1. Standard Screw-Type (bur tool-type)The spindle and chuck (the parts of the turbine that hold the bur) are separate.A bur tool is required to insert and remove the bur; it screws the chuck down into the spindle causing the chuck to tighten around

  News October 11, 2019
• Disadvantages of Push Button Chucks

  Disadvantages of Push Button ChucksDo not provide as strong a grip on the bur as screw-type chucks.Heavy use can cause the chuck to strip, which will result in poor bur retention.Higher cost to purchase.Once the chuck fails the whole turbine must be replaced instead of just the chuck.

  News October 11, 2019
• What to look for in a dental chair

  What to Look for in a Dental ChairYour dental practice will only be a success if all your equipment is functioning properly. When it comes to choosing dental chairs, it’s vital to pick chairs that are comfortable, functional and reliable.You want to have chairs that are ergonomically designed to hel

  News October 11, 2019
• What is a high speed handpiece

  What is a High Speed Handpiece? A hand held drill, usually air-driven (can also be electric), that spins cutting burs at approximately 400,000 RPM. Used for cavity preparation, removal of tooth structure and margin creation.

  News October 11, 2019