English
Views: 1 Author: Site Editor Publish Time: 2020-07-02 Origin: Site
dental suction unit plays an important role in both clinic and hospital, and right ways to clean and maintain a dental suction unit can make a dental suction unit service longer,so this article will introduce how to clean and maintain a dental suction unit.
1.Cleaning of dental suction unit:
2.Maintenance of dental suction unit
3. Primary maintenance of dental suction unit
4. Secondary maintenance of dental suction unit
1.Strictly implement the aseptic operation, and replace the sputum aspiration material in the dish 1 to 2 times a day, and replace the sputum aspiration tube every time, and make good oral care.
2, regular sputum aspiration, when the throat is found to have sputum sound or sputum drainage is not free, should be timely suction.
3. Pay attention to the changes of the condition during operation of dental suction unit and provide guidance to the patients.
4, the storage of the liquid storage bottle, is generally 1/3 of the bottle capacity, not more than 500ml, more than to immediately stop sputum aspiration, and pour decontamination liquid, after treatment for reuse.
5. If the patient has a falling tongue, the lower jaw should be held up, and then the tongue will be gently pulled out with tongue forceps and then inserted into a catheter to suck sputum.
6. When dental suction unit is stopped from use, clean and soak the sterilized liquid storage bottle and rubber pipe, dry and set aside.Replace 2 times a week for continuous use of dental suction unit.
7. The buffer bottle ACTS as a buffer against airflow. It is strictly prohibited to use as a liquid storage bottle to avoid liquid entering the pump body and damaging the machine.
8. After use of dental suction unit , make sure the negative pressure is lower than 0.02kpa before shutdown
The maintenance of dental suction unit can be divided into two categories. Next, we will introduce two maintenance methods of dental suction unit
(1)To clean the overflow protection cup, first remove the medical protection cup from the negative pressure straw, then take out the protection cup, take out the float, seal the seat, wash the disinfection parts with 84 disinfectant, and finally clean with water.
(2)The relevant pipes and waste liquid barrels are cleaned and disinfected with 84 disinfectant, and finally cleaned with clean water.
(3)After disinfection, adjust the switch to the "off" device, adjust the knob to rotate anticlockwise to zero, in a well-ventilated environment, residual disinfectant volatilization, to avoid dripping;
The dental suction unit is a national legal measuring tool and should be calibrated regularly according to the relevant national regulations.
The medical equipment department conducts a one-time energy test of dental suction unit every six months, and timely conducts preventive maintenance if problems are found.
The cleaning and maintenance of dental suction unit is very important. If you want to know more professional knowledge about dental suction unit, you can contact us at any time. We not only provide satisfactory dental suction unit, but also provide considerate service.
