English
 |
| Quantity: | |
|---|---|
OSA-IWE-01
OSAKADENTAL
901849900
OSA-IWE-01,Dental ELECTRONIC UNIVERSAL TOOL BOX
Imported chip, precise control of torque, alarm upon arrival Revolutionary upgrade
Operation steps:
1) Power on: Short press the power button to power on
2) Preset torque value method: Set the preset torque value (torque value range10--40N.CM) by
clicking (long press for continuous adjustment) to increase or decrease the key. (The settings
are shown in Figure 3)
3) When reciprocating clockwise to install the abutment, crown, etc., when the preset torque is
reached, the buzzer will sound to prompt. Note: When the buzzersounds, please do not continue
to increase the force, otherwise it will exceed thepreset setting, resulting in excessive torque.
4) To remove the abutment, first follow the requirements of the above points 3, 4, and 5, and then
rotate counterclockwise back and forth to remove the abutment.
5) When the work is completed, if there is no button operation, it will automaticallyshut down in 1
minute. There is no need to shut down the machine separately.
OSA-IWE-01,Dental ELECTRONIC UNIVERSAL TOOL BOX
Imported chip, precise control of torque, alarm upon arrival Revolutionary upgrade
Operation steps:
1) Power on: Short press the power button to power on
2) Preset torque value method: Set the preset torque value (torque value range10--40N.CM) by
clicking (long press for continuous adjustment) to increase or decrease the key. (The settings
are shown in Figure 3)
3) When reciprocating clockwise to install the abutment, crown, etc., when the preset torque is
reached, the buzzer will sound to prompt. Note: When the buzzersounds, please do not continue
to increase the force, otherwise it will exceed thepreset setting, resulting in excessive torque.
4) To remove the abutment, first follow the requirements of the above points 3, 4, and 5, and then
rotate counterclockwise back and forth to remove the abutment.
5) When the work is completed, if there is no button operation, it will automaticallyshut down in 1
minute. There is no need to shut down the machine separately.
