Availability: | |
---|---|
Quantity: | |
OSA-Furnace 2
OSAKADENTAL
1.Fast sintering of the fully form
2.Predrying
3.Maximum sintering temperature 1530C
4.Finish glazing in 9 minutes
5.Maximum heating speed 200C/ S
6.Ready to use after power on, without 2 hoursof preheating
7.Active cooling
8.Crown restoration 4-10(60mm dianeter tray)
9.WXLXH:27*36*56cm AND 29*22*135cm
ELECTRIC POWER
Operation range 100-120V 50/60HZ 230V 50/60HZ
Electric current 11.5ampere@110V 5.5ampere@230V
Power max 1200w
POWER UNIT
Voltage controller. The service life of the silicon elemais effectively prolonged.
VOICE PROMPT
Each stage has voice prompt, Program selection promptto prevent using wrong program.
1.Fast sintering of the fully form
2.Predrying
3.Maximum sintering temperature 1530C
4.Finish glazing in 9 minutes
5.Maximum heating speed 200C/ S
6.Ready to use after power on, without 2 hoursof preheating
7.Active cooling
8.Crown restoration 4-10(60mm dianeter tray)
9.WXLXH:27*36*56cm AND 29*22*135cm
ELECTRIC POWER
Operation range 100-120V 50/60HZ 230V 50/60HZ
Electric current 11.5ampere@110V 5.5ampere@230V
Power max 1200w
POWER UNIT
Voltage controller. The service life of the silicon elemais effectively prolonged.
VOICE PROMPT
Each stage has voice prompt, Program selection promptto prevent using wrong program.